RPI-5

sudo curl https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh |sudo bash

 

RPi-5 Layout

timedatectl

Link to full documentationtimedatectl

After installation of the RTC Battery, display battery status with:

cat /sys/devices/platform/soc/soc:rpi_rtc/rtc/rtc0/charging_voltage
cat /sys/devices/platform/soc/soc:rpi_rtc/rtc/rtc0/charging_voltage_max
cat /sys/devices/platform/soc/soc:rpi_rtc/rtc/rtc0/charging_voltage_min

Check Operation of the RTC:

Setting-up a USB Speaker
Install a sound driver, in this example Pulseaudio:

sudo apt-get install pulseaudio
Check the driver is installed:

cat /proc/asound/modules
0 snd_usb_audio
1 vc4
2 vc4
Test the sound:

speaker-test -c2 -twav -l9 -D plughw:0,0
Set the sound level to maximum:

sudo amixer sset PCM 100% -M

timedatectl

               Local time: Mon 2024-01-08 15:59:38 GMT
           Universal time: Mon 2024-01-08 15:59:38 UTC
                 RTC time: Mon 2024-01-08 15:59:38
                Time zone: Europe/London (GMT, +0000)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

Setting-up a USB Speaker

  1. Install a sound driver, in this example Pulseaudio:
    1. sudo apt-get install pulseaudio
  2. Check the driver is installed:
    1. cat /proc/asound/modules
      0 snd_usb_audio
      1 vc4
      2 vc4
  3. Test the sound:
    1. speaker-test -c2 -twav -l9 -D plughw:0,0
  4. Set the sound level to maximumsudo curl https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh |sudo bash
    1. sudo amixer sset PCM 100% -M

NVME Speed check

sudo hdparm -t –direct /dev/nvme0n1

Simple Benchmark:

sudo curl https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh |sudo bash