Recover Wi-Fi Connections

1. Connect a monitor and keyboard and mouse
2. at the ha> prompt, enter: login
   (literally type in the word login, this will get you to a # prompt)
3. To assure Wi-Fi is functioning, enter: nmcli radio
4. Scan available Wi-Fi access enter:  nmcli device wifi rescan
5. List available Wi-Fi access enter:  nmcli device wifi
6. Connect to your wifi (incude quotes) enter:   nmcli device wifi connect “YOUR_SSID” password “YOUR_WIFI_PASSWORD”
   This will try to connect to your SSID and will generate a network profile for you if successful.
   The output will be similar to
   "Device 'wlan0' successfully activated with...."
7. Show connections enter:  nmcli con show
   There may be two separate ip addresses on your network: one for ethernet, one for Wi-Fi.
8. Check the ip addresses enter: ip addr show
   Now connect to http(s)://your_wifi_ip:8123 in your browser.

ZIGBEE2MQTT Configuration

server: mqtt://core-mosquitto:1883

port: get hardware address in full from System, Hardware, All and scroll down to ttyUSB section

Using the HA Repair Tools

ha su repair
ha core rebuild
ha host reboot